MVR evaporator is a special evaporator equipment. At present, it is widely used in many fields. When using it, you should not only know its operation method, but also know its performance. Today, we will introduce the features of this product in detail.
1. The temperature of materials evaporated by the equipment is relatively low, and the evaporation temperature is between 35 ℃ and 100 ℃, so foam will not be generated. The feed liquid is very uniform, and there will be no material leakage and coking. In addition, the heating deformation ability of the material is also very small.
2. The equipment price is generally high, especially the mechanical compression evaporator, which is about twice as high as the multi-effect evaporator. However, for new projects, MVR evaporator is more suitable, and the cost can be recovered in a short time. For example, the cost can be recovered after about 300 days of operation, which is quite worthwhile compared with its purchase price. For mechanical compression MVR evaporator, it can replace the original multi-effect evaporator, and has a strong advantage of energy conservation and environmental protection. The average person can recover the cost after more than 500 days.
3. The energy consumption of the equipment is electric energy, and every ton of water evaporated will consume 15-27 degrees. If it is a low boiling point material, the electric energy used can be below 20 ℃, which has a great advantage over the traditional multi-effect evaporator, and can save more than 60% energy.
It can be seen that the MVR evaporator product is an energy-saving and environment-friendly device, which will not produce pollution when used, and is also relatively energy-saving, which is much better than using traditional gas products; And it can run continuously without any trouble. In addition, the appropriate product type should be selected when purchasing.
